Algal Biotechnology for Fuel Applications -  - E-Book

Algal Biotechnology for Fuel Applications E-Book

0,0
86,66 €

-100%
Sammeln Sie Punkte in unserem Gutscheinprogramm und kaufen Sie E-Books und Hörbücher mit bis zu 100% Rabatt.
Mehr erfahren.
Beschreibung

Intensive use of fossil-based energy sources causes significant environmental problems on a global scale. Researchers have been working for several decades to find alternative energy solutions to fossil fuels. Algae are a renewable energy source, with high potential for increasing scarce resources and reducing environmental problems caused by fossil fuel use.
Algal Biotechnology for Fuel Applications gives the reader a comprehensive picture of the industrial use of algae for generating power. This book informs readers about the existence of alternative species to the currently used algae species for biofuel production, while also explaining the methods and current concepts in sustainable biofuel production.

Key Features
- Fifteen chapters covering topics on commercial algae species and algal biofuel production.
- Covers anaerobic biotechnology and basic biofuel production from thermal liquefaction
- Covers biodiesel production and algal biofuel characterization
- Introduces the reader to applied microbial fuel cell technology and algae cultivation methods
- Provides concepts about ecological engineering
- Covers microalgae culture and biofuel production techniques
- Explains the importance of catalysts
- Explains the economic evaluation of algae fuel production technology

This reference is essential reading for students and academics involved in environmental science, biotechnology, chemical engineering and sustainability education programs. It also serves as a reference for general readers who want to understand the ins and outs of algal biofuel technology.

Sie lesen das E-Book in den Legimi-Apps auf:

Android
iOS
von Legimi
zertifizierten E-Readern

Seitenzahl: 562

Veröffentlichungsjahr: 2003

Bewertungen
0,0
0
0
0
0
0
Mehr Informationen
Mehr Informationen
Legimi prüft nicht, ob Rezensionen von Nutzern stammen, die den betreffenden Titel tatsächlich gekauft oder gelesen/gehört haben. Wir entfernen aber gefälschte Rezensionen.



Table of Contents
BENTHAM SCIENCE PUBLISHERS LTD.
End User License Agreement (for non-institutional, personal use)
Usage Rules:
Disclaimer:
Limitation of Liability:
General:
PREFACE
List of Contributors
Introduction
Abstract
INTRODUCTION
Photobioreactors
Heterotrophic Bioreactors
Outdoor Pools
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
References
Anaerobic Algal Biotechnology
Abstract
INTRODUCTION
Step 1: Hydrolysis
Step 2: Fermentation or Acidogenesis
Step 3: Acetogenesis
Step 4: Methanogenesis
BIOGAS PRODUCTION VIA ANAEROBIC DIGESTION
Biogas Production Global Overview
Costs
Agricultural Waste Products (Mostly Slurry and Fertilizer): 0 USD / GJ - 6 USD / GJ
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Thermal Liquefaction Based Algal Biotechnology
Abstract
INTRODUCTION
THERMAL LIQUEFACTION TECHNOLOGY
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
References
Biodiesel Production from Algae Oil
Abstract
INTRODUCTION
Algae Oil Characterization And Fatty Acid Distribution
Biodiesel Production from Algae Oil
EXPERIMENTAL
RESULTS AND DISCUSSIONS
Analysis of Fuel Properties of Algae Oil Biodiesel
Evaluation of Fuel Properties
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Algal Biodiesel Chemical Characterization
Abstract
INTRODUCTION
ALGAE OIL AND ITS PROPERTIES
ANALYSIS OF FUEL PROPERTIES OF ALGAE OIL BIODIESEL
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Microbial Fuel Cells (MFCs) Technology
Abstract
INTRODUCTION
Microbial Fuel Cells (MFCs)
ANODE Materials
CATHODE MATERIALS
MEMBRANE MATERIALS
MFC TYPES
TWO-CHAMBER MFC
SINGLE-CHAMBER MFC
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
References
Algae Cultivation in Different Systems
Abstract
INTRODUCTION
OPEN POND SYSTEMS
CLOSED POND SYSTEMS
VARIOUS PHOTOBIOREACTORS FOR ALGAL CULTIVATION
Vertical Column Photobioreactors
TUBULAR PHOTOBIOREACTOR
Helical Tubular Photobioreactors
Bubble Column Photobioreactor (BC-PBR)
Flat Plate Photobioreactor
Heterotrophic Cultivation
Mixotrophic Cultivation
Integrated Systems
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
References
Use of Microbial Fuel Cells (MFCs) in Food Industry Wastewater Treatment
Abstract
INTRODUCTION
COMPONENTS OF MFC
Anode Cell
Cathode Cell
PROTON SELECTIVE MEMBRANE
ELECTRICTY FORMATION IN MFCs
FOOD INDUSTRY WASTEWATER CHARACTERIZATION
Food Industry Wastewater Treatment
Use of MFCs in Food Industry Wastewater Treatment
CONSEQUENCE-RESTRICTING FACTORS
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
References
Development of Algae Oil Production With Ecological Engineering
Abstract
INTRODUCTION
FINDINGS
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Microalgae Culture
Abstract
INTRODUCTION
CULTIVATION OF ALGAE IN PONDS
3. PHOTOBIOREACTORS
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Different Species of Algae
Abstract
INTRODUCTION
KEY FEATURES FOR DETERMINING ALG SPECIES
Temperature
pH
Dissolved Oxygen (mg/l)
Electrical Conductivity (μS/cm)
Salinity (%)
ALGAE SPECIES
Chroococcus turgidus
Chroococcus limneticus
Chroococcus minimus
Chroococcus minör
Microcystis aeruginosa
Microcystis flos-aquae
Gomphosphaeria aponina
Merismopedia Tenuissima
Merismopedia minima
Merismopedia punctata
Aphanocapsa incerta
Pseudanabaena limnetica
Oscillatoria limosa Ag
Oscillatoria rubescens
Oscillatoria tenuis
Oscillatoria brevis
Oscillatoria brevis
Oscillatoria amphibia
Oscillatoria prolifica
Oscillatoria princeps
Lyngbya limnetica
Lyngbya contorta
Oscillatoria majör
Lyngbya wollei
Oscillatoria formosa
Phormidium ambiguum
Anabaenopsis elenkinii
Anabaena affinis
Anabaena flos-aquae
Anabaena catenula
Spirulina Laxissima
Arthrospira majör
Spirulina nordstedtii
Plectonema notatum
Cystoseira barbata
Ulva rigida
Gracilaria verrucose
Chroococcus nägeli
Chroococcus dimidiatus
Pleurococcus minör
Gloeocapsa kützing
Gloeocapsa quaternata
Spirulina turpin Ex gomont
Spirulina subsalsa oersted
Spirulina subtilissima kützing
Spirulina meneghiniana (zanardini) gomont
Spirulina Major kützing
Leptolyngbya
Leptolyngbya tenuis
Planktolyngbya
Planktolyngbya subtilis
Limnothrix
Limnothrix amphigranulata
Jaaginema anagnostidis
Jaaginema pseudogeminata
Oscillatoria vaucher
Oscillatoria princeps vaucher ex gomont
Oscillatoria proteus skuja
Oscillatoria boryana bory
Oscillatoria calcuttensis Biswas
Lyngbya C. agardh ex gomont
Lyngbya contorta lemmermann
Phormidium kützing ex gomont
Phormidium chlorinum (kützing)
Phormidium willei
Phormidium terebriforme
Phormidium amphibium
Phormidium formosum
Phormidium splendens
Calothrix thermalis
Calothrix marchica lemmermann
Mastigocladus cf. laminosus
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Lipid Production in Microalgae
Abstract
INTRODUCTION
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
References
The Science of Catalysts in Algae Oil Production
Abstract
HOMOGEN CATALYSTS
HETEROGEN CATALYSTS
Lipase Catalysts
ENZYME DETENTION METHODS
ADVANTAGES OF CAPTURING ENZYMES
ADSORPTION
TRAPPING ENZYMES
ENCAPSULATION
IONIC BONDING
COVALENT BONDING
Covalent Binding of Lipase to Perlite Support
CROSS-LINKING
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Economical Fundamentals for Algae to Fuel Technology
Abstract
LIFETIME COST CALCULATION OF ASSETS
PRESENT VALUE FACTOR
CAPITAL RECOVERY FACTOR
ANNUAL COST
EXERGY COST
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
REFERENCES
Closing Remarks
Abstract
INTRODUCTION
Microalgae
OIL EXTRACTION FROM SEEDS
Mechanical Pressing Process
Solvent Extraction
Supercritical Fluid Extraction
BIOFUEL FROM MARINE CREATURES
Biofuel from Algae
CONCLUSION
CONSENT FOR PUBLICATION
CONFLICT OF INTEREST
ACKNOWLEDGEMENT
References
Recent Advances in Biotechnology
(Volume 6)
Algal Biotechnology for Fuel Applications
Edited by
Hüseyin Karaca
Chemical Engineering Department,
Engineering Faculty, Inonu University,
Elazig Road 15th km, 44280-Campus,
Malatya, Turkey
&
Cemil Koyunoğlu
Energy Systems Engineering Department,
Engineering Faculty, Yalova University,
Yalova, Turkey

BENTHAM SCIENCE PUBLISHERS LTD.

End User License Agreement (for non-institutional, personal use)

This is an agreement between you and Bentham Science Publishers Ltd. Please read this License Agreement carefully before using the book/echapter/ejournal (“Work”). Your use of the Work constitutes your agreement to the terms and conditions set forth in this License Agreement. If you do not agree to these terms and conditions then you should not use the Work.

Bentham Science Publishers agrees to grant you a non-exclusive, non-transferable limited license to use the Work subject to and in accordance with the following terms and conditions. This License Agreement is for non-library, personal use only. For a library / institutional / multi user license in respect of the Work, please contact: [email protected].

Usage Rules:

All rights reserved: The Work is the subject of copyright and Bentham Science Publishers either owns the Work (and the copyright in it) or is licensed to distribute the Work. You shall not copy, reproduce, modify, remove, delete, augment, add to, publish, transmit, sell, resell, create derivative works from, or in any way exploit the Work or make the Work available for others to do any of the same, in any form or by any means, in whole or in part, in each case without the prior written permission of Bentham Science Publishers, unless stated otherwise in this License Agreement.You may download a copy of the Work on one occasion to one personal computer (including tablet, laptop, desktop, or other such devices). You may make one back-up copy of the Work to avoid losing it.The unauthorised use or distribution of copyrighted or other proprietary content is illegal and could subject you to liability for substantial money damages. You will be liable for any damage resulting from your misuse of the Work or any violation of this License Agreement, including any infringement by you of copyrights or proprietary rights.

Disclaimer:

Bentham Science Publishers does not guarantee that the information in the Work is error-free, or warrant that it will meet your requirements or that access to the Work will be uninterrupted or error-free. The Work is provided "as is" without warranty of any kind, either express or implied or statutory, including, without limitation, implied warranties of merchantability and fitness for a particular purpose. The entire risk as to the results and performance of the Work is assumed by you. No responsibility is assumed by Bentham Science Publishers, its staff, editors and/or authors for any injury and/or damage to persons or property as a matter of products liability, negligence or otherwise, or from any use or operation of any methods, products instruction, advertisements or ideas contained in the Work.

Limitation of Liability:

In no event will Bentham Science Publishers, its staff, editors and/or authors, be liable for any damages, including, without limitation, special, incidental and/or consequential damages and/or damages for lost data and/or profits arising out of (whether directly or indirectly) the use or inability to use the Work. The entire liability of Bentham Science Publishers shall be limited to the amount actually paid by you for the Work.

General:

Any dispute or claim arising out of or in connection with this License Agreement or the Work (including non-contractual disputes or claims) will be governed by and construed in accordance with the laws of Singapore. Each party agrees that the courts of the state of Singapore shall have exclusive jurisdiction to settle any dispute or claim arising out of or in connection with this License Agreement or the Work (including non-contractual disputes or claims).Your rights under this License Agreement will automatically terminate without notice and without the need for a court order if at any point you breach any terms of this License Agreement. In no event will any delay or failure by Bentham Science Publishers in enforcing your compliance with this License Agreement constitute a waiver of any of its rights.You acknowledge that you have read this License Agreement, and agree to be bound by its terms and conditions. To the extent that any other terms and conditions presented on any website of Bentham Science Publishers conflict with, or are inconsistent with, the terms and conditions set out in this License Agreement, you acknowledge that the terms and conditions set out in this License Agreement shall prevail.

Bentham Science Publishers Pte. Ltd. 80 Robinson Road #02-00 Singapore 068898 Singapore Email: [email protected]

PREFACE

Algae are a solution to reduce carbon emissions, especially in today's world where the global climate has become important. The United Nations and the European Union suggested that algae can be used in this regard. With the genetic engineering done in the past, it has been observed that algae can be reproduced with synthetic DNA. It is even said that algae will evolve into a separate life form from other living things. Our book offers a wide range of environment-friendly algae technologies that reduce harmful emissions. In future editions, criticism from valuable readers will allow us to further develop new issues.

Hüseyin Karaca Chemical Engineering Department, Engineering Faculty, Inonu University, Elazig Road 15th km, 44280-Campus, Malatya, TurkeyCemil Koyunoğlu Energy Systems Engineering Department, Engineering Faculty, Yalova University,

List of Contributors

Cemil KoyunoğluEnergy Systems and Engineering Department, Faculty of Engineering, Yalova University, Yalova, TurkeyEce PolatEnvironmental Engineering Department, Faculty of Engineering and Architecture, Sinop University, Sinop, TurkeyFevzi YaşarChemistry and Chemical Process Technology Department, Vocational School of Technical Sciences, Batman University, 72100, Batman, TurkeyHüseyin KaracaChemical Engineering Department, Engineering Faculty, Inonu University, Malatya, TurkeyLeyla UsluMarine Biology Department, Fisheries Faculty, Cukurova University, 01330, Adana, TurkeMesut YılmazoğluChemical Engineering Department, Engineering Faculty, Yalova University, 77100, TurkeyOya IşıkMarine Biology Department, Fisheries Faculty, Cukurova University, 01330, Adana, Turkey

Introduction

Cemil Koyunoğlu1,*,Hüseyin Karaca2
1 Energy Systems Engineering Department, Faculty of Engineering, Yalova University, Yalova, Turkey
2 Chemical Engineering Department, Engineering Faculty, Inonu University, Malatya, Turkey

Abstract

The purpose of writing this book is to justify the production of biofuels from algae to minimize the emissions of fossil fuel technologies to reduce their environmental effects. Moreover, the use of algae, to reduce the amount of CO2 emissions from the global CO2 cycle is an alternative to existing biomass conversion technologies. The book covers the most efficient algae-to-oil conversion technologies, fuel characterization, and their reflection on different technologies. It is our hope that the topics here will not only help the scientific community for a more thorough understanding of alternatives to fossil fuels but also the civil society at large as well as policymakers at national and international level.

Keywords: Algae, Algae to oil, Biofuel production, Energy Consumption, Harvesting, Species.
*Correspondence author Cemil Koyunoğlu: Energy Systems Engineering Department, Faculty of Engineering, Yalova University, Yalova, Turkey; Tel: +90 226 8155378; E-mail: [email protected]

INTRODUCTION

Many algae conversion technologies can convert raw bio materials to liquid biofuels (Fig. 1). Liquid biofuels are preferred mostly in the transportation industry and many of these technologies produce various intermediates during biomass to liquid fuel conversation (Fig. 2) [1-24].

Industry actors, definitions, and the current status of the biomass process are given in Figs. (3-5) [1-24].

Fig. (1)) Patented biofuel technologies [25]. Fig. (2)) Biofuel pathways [25]. Fig. (3)) Biofuel inventions [25]. Fig. (4)) Advanced biofuel technology basic definition [26]. Fig. (5)) World population growth rate [27].

Beyond the technology used to transform wastes into biofuel biotechnologically, it is seen that the type of raw material used is more critical [1-24].

Agricultural wastes: They include post-harvest biomass such as corn cobs and straw (corn cobs, nutshell, sugarcane meal) [1-24].

Biogenic wastes: Biogenic wastes are in the solid phase, including parks such as garden wastes, municipal solid wastes, industrial wastes, roadside, and all wastes released from household consumption [1-24].Energy plants other than food consumption: These are grass plants such as willow, poplar, Miscanthus, switchgear, canary grass, cane, and energy herbs such as wood plants [1-24].Forest residues such as woody biomass shavings, leaves, branches, cutting chips, sawdust, etc. come from forestry activities [1-24].Seaweeds (Macroalgae), commonly used for biogas production, are obtained from private farms or natural habitats and are potential sources of carbohydrates. They are harvested by the anaerobic method in small volumes, given their high water and ash content [1-24].Microalgae are grown in photobioreactors and open pools and have high lipid content [1-24].

Technical potential: Issues such as harvesting, picking, and subsequent reduction in productivity are the remaining challenges to full potential of algae technology [1-24].

Theoretical potential: It is a usable energy potential of raw material from a specific region [1-24]. Economic potential: It is the possible technical component that is economical for collecting the product, taking into account the availability of the resource, the costs of production, or harvesting [1-24].Sustainable potential: Other ecological and social issues such as cultivation methods, protection of soil quality, food safety, pesticide, or synthetic fertilizer application limits and water use are taken into consideration [1-24].

It is essential to know the biomass reserves. To better understand the algae as the potential biomass source for bioenergy, it is necessary to know the current status and classification of other biomass. Since the use of algae is sustainable, the economic and environmental conditions should be accurately compared with the conditions of other competing biomass [1-24].

However, it is known that the world’s energy demand is essential for determining the biofuel potential of algae. According to the IPCC report, by 2050, the energy from biomass is expected to provide one-fifth of the world’s primary energy demand at approximately 100 Exajoules. The cost of energy biomass raw materials determined was 1.6-5.2 USD (2020 cost), excluding algae and biogenic wastes. By 2050, the price of forest and agricultural wastes is expected to remain constant or increase partially. The cost of biomass energy used in food production is expected to decrease [1-24].

The cost of solid biogenic waste is high due to the need for landfills [1-24].

Agricultural residues: Agricultural residues with a high potential depend on the possibility of energy crops. Transport and collection costs of raw materials may be high because these residues are limited, given the factors such as the use of straw in horse breeding Some of the agricultural remains are left on the site to preserve the natural structure of the soil, while some crop waste is used in household heating [1-24].Solid biogenic wastes: The energy conversion is still on the agenda due to the need for disposal and less competitive potential. Increasing population and increasing energy needs suggest that this group of biomass will continue to exist as an alternative energy form (Figs. 5-8). Its disposal affects its cost depending on the type of waste. Power and heat are also involved in energy production. In general, such wastes are used in a direct incineration plant. Recyclable derivatives such as cardboard and paper can be returned to the fields. Minimizing, handling, recycling, and reusing waste is essential in this sense [1-24].Non-food energy crops: Especially due to land availability, methodological differences, and environmental constraints, these wastes have been brought to the agenda. Increasing the need for land brought by advanced agricultural practices, sustainable soil management, and water availability keep non-food energy crops on the list [1-24].

Raw material costs for other residues are higher than algae. Both the development of supply chains, differences in regions with different crops, and changing energy values ​​are the main obstacles in determining cost estimates [1-24].

Fig. (6)) World energy consumption is due to population growth [27]. Algae: Determining the amount of raw material is essential in terms of developing breeding systems. Since the parameters such as nutrients, water, and adequate irradiation required for algae cultivation are limited to determine the regional reserves. Although it is known that algae are used in the cosmetic industry today, it seems possible to use them as energy raw materials by collecting, growing, and decreasing harvest costs [1-24].Forest remains: The determination of their potential is based on the regions where forestry activities are commercial. Low collection costs for heat and electricity generation increase the demand for forest remains. It increases the value of the collection in terms of being accessible to forest remains in non-commercial areas. The residues occurring in the commercial forest industry required for wood production and animal beds are left on site for the sustainability of soil quality, as mentioned earlier (Fig. 9) [1-24].Fig. (7)) World primary energy dispersions via year. Fig. (8)) World geographical regions primary energy consumption via year [27]. Fig. (9)) Lignocellulose structure consists of wood production residue [28].

Various methods are explored, particularly for micro-algae, for their economic production from suitable algae oils (Fig. 10). These methods include extraction, micro-algae cultivation, and reduction of oil collection costs. Trials of genetically modified microalgae and other species, as well as existing micro-algae species, provide relevant studies in increasing the conversion efficiency of solar energy to organic energy and reducing its cost [1-24].

Fig. (10)) Algae to biofuel pathway in a cell [29]. In micro-algae cultivation, it is essential that open pools are practical and economical, and made of durable material that can withstand the growing life in maximum time [1-24].Determination of the conditions (temperature, pressure, etc.) to be carried out in the photobioreactor in a minimum time to grow micro-algae [1-24].Resolution of situations that negatively affect fertilizer input, nitrogen deficiency, lipid productivity, and quality [1-24].Mechanical optimization (geometric optimization of the mixer, etc.) required to increase the breeding efficiency in the pools, is done to increase the maximum lipid efficiency [1-24].Study of issues such as separation from solvent separation technologies after oil production (separation with solvent extraction, electromagnetic field separation, and effectiveness of centrifuges) will be mentioned in the following chapters of our book and hydrothermal liquefaction methods draw attention in terms of the efficiency of oil extraction methods [1-24]. There are several studies on the effectiveness of the catalyst used in this technology. Another topic of research is the reuse of wastewater, and the oil content obtained is essential [1-24].

Microalgae, evaluated in multi and single-celled organism classes, can take CO2 from the atmosphere and convert it into fuels such as lipid and ethanol. Various algae-type related carbohydrate content list is shown in Table 1 [1-24].

Table 1Carbohydrates content in various microalgae species [29].Microalgae SpeciesCarbohydrate Content (Total, % Dry Mass)Tetraselmis suecica15–50aPrymnesium parvum25–33Dunaliella salina32Dunaliella bioculata4Chlorococcum sp.32.5Chlorella vulgaris12–17Euglena gracilis14–18Scenedesmus dimorphus21–52Scenedesmus obliquus15–51.8Spirogyra sp.33-64Nannochloropsis oculata8Isochrysis sp.5.2–16.4Synechoccus sp.15Isochrysis galbana7.7–13.6Mychonastes afer28.4Spirulina maxima13–16Porphyridium cruentum40Tetraselmis maculate15Scenedesmus abundans41Tetraselmis sp.24Chlorella sp.19Spirulina platensis8–20Chlorella pyrenoidosa26Chlamydomonas reindhardtii17

Algae feeding stock can be realized in many steps [1-24].

Only by determining the types of algae, the variety of species that can produce the most oil and even biofuel is determined. The pool establishes the environment where it will be grown later as closed and open [1-24].

Photobioreactors

In algae photobioreactor, which has a tubular design, it is determined as to which type of growing medium (such as CO2, water, food, and light) will facilitate the growth of algae in minimum time. It also allows micro-algae to grow safely. Photobioreactors provide high efficiency in the absence of water evaporation and oil production. Photobioreactors do not carry the sensitivity of determining the region involved in the installation of pools [1-24].

The disadvantages are energy consumption, high capital costs, maintenance of the inner surface of the photobioreactor (algae produce a protein that prevents the permeability of light to the reactor), and effective light transmission [1-24].

Heterotrophic Bioreactors

Such algae can be fed in non-light environments, and their carbon sources are sugar. These sugars turn into triglycerides as a result of algae digestion and then fuel. Most of the algae that fit this production method belong to the Chlorella species. Sugar cane can be used as a raw material in these bioreactors. The area required for the installation of pools, which do not need to be installed in specific areas, is less than that of pools [1-24].

Outdoor Pools

Open pools may be preferred to increase the contact surface area of ​​microalgae with CO2 so as to increase oil production. The harvest can thicken in the pond and settle continuously. Its most significant advantage over other algae growing methods is its low installation cost. It is essential to reduce the value of the required components during system design, which is necessary to meet the large-scale fuel demand. These pools have geographical region restrictions. However, the main issues that determine the operating costs are the intensification and drying processes after algae growth. In addition to reducing the energy costs of these stages, it is also on the agenda to use waste sugar sources as raw materials. The methods applied in harvesting microalgae are essential. These are flocculation, sedimentation (H. pluvialis, which separates when it reaches the red color stage), membrane filtration (used for thread algae at intervals> 25 microns), centrifugal water removal, and sieving. For Dunaliella, it is one of the new methods of absorption attached to an iron Filament on a high-grade magnet on polystyrene. There are various methods for separating oil from microalgae such as chemical, enzymatic and physical mechanisms. Micro-algae are mostly grown to produce transportation fuels such as renewable gasoline, FAME biodiesel, jet fuel, and diesel [1-24].

Unlike other agricultural biomass species, algae offer environmentally friendly production opportunities. They are grown in bitter, salt, and freshwater in pools set up in uncultivated soils. Micro-algae technology, which is mostly used in cosmetics, with low sales prices of high quantity products, has to be lowered for fuel production. A company called Solazyme has accomplished this and has gone into commercial fuel production and is the largest global manufacturer. This company has 2 million biofuels produced annually, one in Peoria, the second plant in Brazil, which has a biofuel capacity of 100 million liters a year, and a third plant in the US, which has a capacity of 20 million liters. Also, pilot-scale research studies with many funded projects continue in the world. According to the results of the project, production costs should be reduced to a competitive level, and production reliability should be ensured, too. It is crucial to determine values ​​such as high production rates, net energy production, and oil yield, wide range of products (fuel and chemicals) for high-scale production. It can be said that issues such as changing the genetic modifications of algae for low cost and high output of products are on the agenda [1-24].

In the following sections, harvesting of algae, production by thermal liquefaction method, biodiesel production, characterization, and finally fuel cell developments are explained in detail [1-24].

CONCLUSION

Today, the intense use of fossil fuels in energy production causes significant environmental problems at the global level. Therefore, it is important both to reduce these environmental problems and to research the production ways of new alternative fuels to oil and natural gas. In this context, it is important to evaluate biomass, one of the renewable energy sources, both as an energy source and as a basic chemical raw material source by using various conversion technologies. Algae, which is one of the biomass types, is more advantageous than other biomass types, both to reduce carbon dioxide causing the greenhouse effect and using it as an input to produce new alternative fuels or basic chemical raw materials. Therefore, it is important to produce basic chemical raw materials by using algae directly or indirectly and to develop evaluation technologies as an energy source.

CONSENT FOR PUBLICATION

Not applicable.

CONFLICT OF INTEREST

The author declares no conflict of interest, financial or otherwise.

ACKNOWLEDGEMENT

Declared none.

References

[1]Hiloidhari M, Bhuyan N, Gogoi N, et al. 16 - Agroindustry wastes: Biofuels and biomaterials feedstocks for sustainable rural development. In: Kumar RP, Gnansounou E, Raman JK, Baskar G, eds. Refining Biomass Residues for Sustainable Energy and Bioproducts Kumar RP, Gnansounou E, Raman JK, Baskar G. 2020357-88.[http://dx.doi.org/10.1016/B978-0-12-818996-2.00016-8][2]Chua SY, Periasamy LAP, Goh CMH, et al. Biodiesel synthesis using natural solid catalyst derived from biomass waste — A review. J Ind Eng Chem 2020; 81: 41-60.[http://dx.doi.org/10.1016/j.jiec.2019.09.022][3]Ziolkowska JR. Chapter 1 - Biofuels technologies: An overview of feedstocks, processes, and technologies. In: Ren J, Scipioni A, Manzardo A, Liang H, eds. Biofuels for a More Sustainable Future Ren J, Scipioni A, Manzardo A, Liang H. 20201-19.[http://dx.doi.org/10.1016/B978-0-12-815581-3.00001-4][4]Patel A, Matsakas L, Sartaj K, Chandra R. Chapter 2 - Extraction of lipids from algae using supercritical carbon dioxide. In: Inamuddin , Asiri AM, Isloor AM, eds. Green Sustainable Process for Chemical and Environmental Engineering and Science Inamuddin , Asiri AM, Isloor AM. 202017-39.[5]Lan K, Park S, Yao Y. Chapter 10 - Key issue, challenges, and status quo of models for biofuel supply chain design. In: Ren J, Scipioni A, Manzardo A, Liang H, eds. Biofuels for a More Sustainable Future Ren J, Scipioni A, Manzardo A, Liang H. 2020273-315.[http://dx.doi.org/10.1016/B978-0-12-815581-3.00010-5][6]Dahiya A. Chapter 13 - Algae biomass cultivation for advanced biofuel production. In: Dahiya A, eds. Bioenergy (2nd ed.) 2nd ed.Dahiya A. 2020245-66.[http://dx.doi.org/10.1016/B978-0-12-815497-7.00013-0][7]Sadeghbeigi R. Chapter 17 - Biofuels. Fluid Catalytic Cracking Handbook (4th ed.) 4th ed.2020309-27.[http://dx.doi.org/10.1016/B978-0-12-812663-9.00017-5][8]Makareviciene V, Sendzikiene E. Chapter 22 - Application of microalgae for the production of biodiesel fuel. In: Konur O, eds. Handbook of Algal Science, Technology and Medicine Konur O. 2020353-65.[http://dx.doi.org/10.1016/B978-0-12-818305-2.00022-X][9]Katiyar R, Arora A. Health promoting functional lipids from microalgae pool: A review. Algal Res 2020; 46: 101800.[http://dx.doi.org/10.1016/j.algal.2020.101800][10]Singh D, Sharma D, Soni SL, Sharma S, Kumar Sharma P, Jhalani A. A review on feedstocks, production processes, and yield for different generations of biodiesel. Fuel 2020; 262: 116553.[http://dx.doi.org/10.1016/j.fuel.2019.116553][11]Prabha SP, Nagappan S, Rathna R, Viveka R, Nakkeeran E. 21 - Blue biotechnology: A vision for future marine biorefineries. In: Kumar RP, Gnansounou E, Raman JK, Baskar G, eds. Refining Biomass Residues for Sustainable Energy and Bioproducts Kumar RP, Gnansounou E, Raman JK, Baskar G. 2020463-80.[http://dx.doi.org/10.1016/B978-0-12-818996-2.00021-1][12]Behera BK, Prasad R. Chapter 2 - Greenhouse gas capture and conversion. In: Behera BK, Prasad R, eds. Environmental Technology and Sustainability Behera BK, Prasad R. 202041-71.[http://dx.doi.org/10.1016/B978-0-12-819103-3.00002-0][13]Dahiya A. Chapter 31 - Cutting-edge biofuel conversion technologies to integrate into petroleum-based infrastructure and integrated biorefineries. In: Dahiya A, eds. Bioenergy (2nd ed.) 2nd ed.Dahiya A. 2020649-70.[http://dx.doi.org/10.1016/B978-0-12-815497-7.00031-2][14]Bhadani A, Kafle A, Ogura T, et al. Current perspective of sustainable surfactants based on renewable building blocks. Curr Opin Colloid Interface Sci 2020; 45: 124-35.[http://dx.doi.org/10.1016/j.cocis.2020.01.002][15]Rosemann A, Molyneux-Hodgson S. Industrial Biotechnology: To What Extent Is Responsible Innovation on the Agenda? Trends Biotechnol 2020; 38(1): 5-7.[http://dx.doi.org/10.1016/j.tibtech.2019.07.006] [PMID: 31399264][16]Bhattacharya M, Goswami S. Microalgae – A green multi-product biorefinery for future industrial prospects. Biocatal Agric Biotechnol 2020; 25: 101580.[http://dx.doi.org/10.1016/j.bcab.2020.101580][17]Rajesh Banu J, Preethi , Kavitha S, Gunasekaran M, Kumar G. Microalgae based biorefinery promoting circular bioeconomy-techno economic and life-cycle analysis. Bioresour Technol 2020; 302: 122822.[http://dx.doi.org/10.1016/j.biortech.2020.122822] [PMID: 32007307][18]Gholizadeh M, Hu X, Liu Q. A mini review of the specialties of the bio-oils produced from pyrolysis of 20 different biomasses. Renew Sustain Energy Rev 2019; 114: 109313.[http://dx.doi.org/10.1016/j.rser.2019.109313][19]Rebello S, Anoopkumar AN, Aneesh EM, Sindhu R, Binod P, Pandey A. Sustainability and life cycle assessments of lignocellulosic and algal pretreatments. Bioresour Technol 2020; 301: 122678.[http://dx.doi.org/10.1016/j.biortech.2019.122678] [PMID: 31982298][20]Sekoai PT, Ouma CNM, du Preez SP, et al. Application of nanoparticles in biofuels: An overview. Fuel 2019; 237: 380-97.[http://dx.doi.org/10.1016/j.fuel.2018.10.030][21]Tran NH, Bartlett JR, Kannangara GSK, Milev AS, Volk H, Wilson MA. Catalytic upgrading of biorefinery oil from micro-algae. Fuel 2010; 89(2): 265-74.[http://dx.doi.org/10.1016/j.fuel.2009.08.015][22]Leiva-Candia DE, Pinzi S, Redel-Macías MD, Koutinas A, Webb C, Dorado MP. The potential for agro-industrial waste utilization using oleaginous yeast for the production of biodiesel. Fuel 2014; 123: 33-42.[http://dx.doi.org/10.1016/j.fuel.2014.01.054][23]Wei H, Liu W, Chen X, Yang Q, Li J, Chen H. Renewable bio-jet fuel production for aviation: A review. Fuel 2019; 254: 115599.[http://dx.doi.org/10.1016/j.fuel.2019.06.007][24]Sudan Reddy Dandu M, Nanthagopal K. Tribological aspects of biofuels – A review. Fuel 2019; 258: 116066.[http://dx.doi.org/10.1016/j.fuel.2019.116066][25]Albers SC, Berklund AM, Graff GD. The rise and fall of innovation in biofuels. Nat Biotechnol 2016; 34(8): 814-21.[http://dx.doi.org/10.1038/nbt.3644] [PMID: 27504772][26]Peralta-Yahya PP, Zhang F, del Cardayre SB, Keasling JD. Microbial engineering for the production of advanced biofuels. Nature 2012; 488(7411): 320-8.[http://dx.doi.org/10.1038/nature11478] [PMID: 22895337][27]Zhang Y, Zhang F, Wu S, et al. Chapter 1 - Review and outlook of world energy development. Non-Fossil Energy Development in China 20191-36.[http://dx.doi.org/10.1016/B978-0-12-813106-0.00001-5][28]Roy L, Chakraborty S, Bera D, Adak S. Chapter 5 - Application of metabolic engineering for elimination of undesirable fermentation products during biofuel production from lignocellulosics. In: Kuila A, Sharma V, eds. Genetic and Metabolic Engineering for Improved Biofuel Production from Lignocellulosic Biomass Kuila A, Sharma V. 202063-80.[http://dx.doi.org/10.1016/B978-0-12-817953-6.00005-1][29]Martín-Juárez J, Markou G, Muylaert K, Lorenzo-Hernando A, Bolado S. 8 - Breakthroughs in bioalcohol production from microalgae: Solving the hurdles.Microalgae-Based Biofuels and Bioproducts Gonzalez-Fernandez C, Muñoz R. 2017183-207.[http://dx.doi.org/10.1016/B978-0-08-101023-5.00008-X]

Anaerobic Algal Biotechnology

Ece Polat1,*
1 Environmental Engineering Department, Faculty of Engineering and Architecture, Sinop University, Sinop, Turkey

Abstract

Biogas is produced with an anaerobic method, which involves live digestion of biomass in an oxygen-free environment. The second part of our book gives information about algae technology of the anaerobic process, which produces biogas by a biological process using animal fertilizers, food waste, and bioenergy products. In general, biogas can be used to produce heat and electricity, and its addition to the natural gas network is even considered as a vehicle fuel. It consists of 30-40% CO2 as content, 45-65% CH4. Conversion of CH4, which is 20 times more harmful than CO2 as a greenhouse gas, into energy is essential for the protection of environmental impact. In this sense, the burning of biogas emerges as a greenhouse gas reduction strategy.

Keywords: Algae, Algae to oil, Biofuel production, Energy Consumption, Harvesting, Species.
*Correspondence author Ece Polat: Environmental Engineering Department, Faculty of Engineering and Architecture, Sinop University, Sinop, Turkey; Tel: +90 368 2714395; E-mail: [email protected]

CONSENT FOR PUBLICATION

Not applicable.

CONFLICT OF INTEREST

The author declares no conflict of interest, financial or otherwise.

ACKNOWLEDGEMENT

Declared none.

REFERENCES

[1]Ometto F, Karlsson A, Ejlertsson J, Björn AV, Shakeri SY. 5 - Anaerobic digestion: An engineered biological process.Substitute Natural Gas from Waste Materazzi M, Foscolo PU. 201963-74.[http://dx.doi.org/10.1016/B978-0-12-815554-7.00005-2][2]Muthudineshkumar R, Anand R. 6 - Anaerobic digestion of various feedstocks for second-generation biofuel production.Advances in Eco-Fuels for a Sustainable Environment Azad K. 2019157-85.[http://dx.doi.org/10.1016/B978-0-08-102728-8.00006-1][3]Stamatelatou K, Antonopoulou G, Michailides P. 15 - Biomethane and biohydrogen production via anaerobic digestion/fermentation.Advances in Biorefineries Waldron K. 2014476-524.[http://dx.doi.org/10.1533/9780857097385.2.476][4]Oppong G, O’Brien M, McEwan M, Martin EB, Montague GA. Advanced control for anaerobic digestion processes: Volatile solids soft sensor development.Computer Aided Chemical Engineering Bogle IDL, Fairweather M. 2012; Vol. 30: 967-71.[5]de la Rubia MA, Villamil JA, Mohedano AF. Chapter 4 - Anaerobic digestion for methane and hydrogen production. In: Olivares JA, Puyol D, Melero JA, Dufour J, eds. Wastewater Treatment Residues as Resources for Biorefinery Products and Biofuels Olivares JA, Puyol D, Melero JA, Dufour J. 202067-83.[http://dx.doi.org/10.1016/B978-0-12-816204-0.00004-7][6]Labatut RA, Pronto JL. Chapter 4 - sustainable waste-to-energy technologies: Anaerobic digestion. In: Trabold TA, Babbitt CW, eds. Sustainable Food Waste-To-energy Systems Trabold TA, Babbitt CW. 201847-67.[http://dx.doi.org/10.1016/B978-0-12-811157-4.00004-8][7]Jankowska E, Zieliński M, Dębowski M, Oleśkowicz-Popiel P. Chapter 15 - Anaerobic digestion of microalgae for biomethane production. In: Basile A, Dalena F, eds. Second and Third Generation of Feedstocks Basile A, Dalena F. 2019405-36.[http://dx.doi.org/10.1016/B978-0-12-815162-4.00015-X][8]Kirk DM, Gould MC. Chapter 17 - Bioenergy and anaerobic digestion. In: Dahiya A, eds. Bioenergy (2nd ed.) 2nd ed.Dahiya A. 2020335-60.[http://dx.doi.org/10.1016/B978-0-12-815497-7.00017-8][9]Gould MC. Chapter 18 - Bioenergy and Anaerobic Digestion. In: Dahiya A, eds. Bioenergy Dahiya A. 2015297-317.[http://dx.doi.org/10.1016/B978-0-12-407909-0.00018-3][10]Nguyen D, Nitayavardhana S, Sawatdeenarunat C, Surendra KC, Khanal SK. Chapter 31 - Biogas production by anaerobic digestion: Status and perspectives. Biofuels: Alternative Feedstocks and Conversion Processes for the Production of Liquid and Gaseous Biofuels (Second Edition.) Second Edition.Pandey A, Larroche C, Dussap C-G, Gnansounou E, Khanal SK, Ricke S. 2019763-78.[11]