Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development E-Book

• Herausgeber: John Wiley & Sons
• Kategorie: Fachliteratur
• Serie: Ceramic Transaction Series
• Sprache: Englisch

Seitenzahl: 1002

Veröffentlichungsjahr: 2017

Beschreibung

Global population growth and tremendous economic development has brought us to the crossroads of long-term sustainability and risk of irreversible changes in the ecosystem. Energy efficient and ecofriendly technologies and systems are critically needed for further growth and sustainable development. While ceramic matrix composites were originally developed to overcome problems associated with the brittle nature of monolithic ceramics, today the composites can be tailored for customized purposes and offer energy efficient and ecofriendly applications, including aerospace, ground transportation, and power generation systems. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) was held in Toronto, Canada, June 26-30, 2016 to discuss challenges and opportunities in manufacturing, commercialization, and applications for these important material systems. The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development. This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences * Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain * Innovative Design, Advanced Processing, and Manufacturing Technologies * Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) * Polymer Derived Ceramics and Composites * Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications * Thermomechanical Behavior and Performance of Composites * Ceramic Integration and Additive Manufacturing Technologies * Component Testing and Evaluation of Composites * CMC Applications in Transportation and Industrial Systems * Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development * Novel, Green, and Strategic Processing and Manufacturing Technologies * Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites * Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications * Porous Ceramics for Advanced Applications Through Innovative Processing * Multifunctional Coatings for Sustainable Energy and Environmental Applications

Leseprobe

Advances in HighTemperature Ceramic MatrixComposites and Materials forSustainable Development

Ceramic Transactions, Volume 263

Selected Peer-Reviewed Papers from the 9thInternational Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) and GlobalForum on Advanced Materials and Technologies forSustainable Development (GFMAT 2016)Toronto, Canada, June 26–30, 2016

Edited by

Mrityunjay Singh

Tatsuki Ohji

Shaoming Dong

Dietmar Koch

Kiyoshi Shimamura

Bernd Clauss

Bernhard Heidenreich

Jun Akedo

This edition first published 2017© 2017 The American Ceramic Society

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, except as permitted by law. Advice on how to obtain permission to reuse material from this title is available at http://www.wiley.com/go/permissions.

The right of Mrityunjay Singh, Tatsuki Ohji, Shaoming Dong, Dietmar Koch, Kiyoshi Shimamura, Bernd Clauss, Bernhard Heidenreich, and Jun Akedo to be identified as the editors of this work has been asserted in accordance with law.

Registered OfficeJohn Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, USA

Editorial Office111 River Street, Hoboken, NJ 07030, USA

For details of our global editorial offices, customer services, and more information about Wiley products visit us at www.wiley.com.

Wiley also publishes its books in a variety of electronic formats and by print-on-demand. Some content that appears in standard print versions of this book may not be available in other formats.

Limit of Liability/Disclaimer of WarrantyIn view of ongoing research, equipment modifications, changes in governmental regulations, and the constant flow of information relating to the use of experimental reagents, equipment, and devices, the reader is urged to review and evaluate the information provided in the package insert or instructions for each chemical, piece of equipment, reagent, or device for, among other things, any changes in the instructions or indication of usage and for added warnings and precautions. While the publisher and authors have used their best efforts in preparing this work, they make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives, written sales materials or promotional statements for this work. The fact that an organization, website, or product is referred to in this work as a citation and/or potential source of further information does not mean that the publisher and authors endorse the information or services the organization, website, or product may provide or recommendations it may make. This work is sold with the understanding that the publisher is not engaged in rendering professional services. The advice and strategies contained herein may not be suitable for your situation. You should consult with a specialist where appropriate. Further, readers should be aware that websites listed in this work may have changed or disappeared between when this work was written and when it is read. Neither the publisher nor authors shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages.

Library of Congress Cataloging-in-Publication Data is available.ISBN: 9781119406433

ISSN: 1042-1122

Cover design by Wiley

CONTENTS

Preface

Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites

PHYSICAL AND CHEMICAL PROPERTIES OF SILICON CARBIDE FIBERS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

CONCLUSIONS

REFERENCES

HEAT-RESISTANT INORGANIC FIBERS

ABSTRACT

INTRODUCTION

HISTRICAL POINTS OF INORGANIC FIBERS

PROGRESS IN UBE’s SiC-BASED FIBERS

THE FINE STRUCTURE OF TYRANNO SA

CONCLUSION

ACKNOWLEDGEMENT

REFERENCES

SYNTHESIS, PROPERTIES AND APPLICATIONS OF SIC ULTRATHIN FIBERS VIA ELECTROSPINNING COMBINED WITH THE POLYMER-DERIVED CERAMICS ROUTE

ABSTRACT

INSTRUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

NOVEL OXIDE FIBERS TO REINFORCE CERAMIC AND METAL MATRICES

ABSTRACT

INTRODUCTION

MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FIBERS

POTENTIAL APPLICATIONS OF THE FIBERS

CONCLUSION

ACKNOWLEDGEMENTS

REFERENCES

A JOURNEY IN THE FIELD OF CERAMIC MATRIX COMPOSITES

ABSTRACT

INTRODUCTION AND BACKGROUND

FIRST KEY STEP: THE CVI-PROCESS

SECOND KEY STEP: EXTENSION OF THE CVI-PROCESS TO OTHER CERAMICS

THIRD KEY STEP: THE INTERPHASE CONCEPT

FOURTH KEY STEP: THE CONCEPT OF SELF-HEALING MATRIX

CONCLUSION

ACKNOWLEDGEMENTS

REFERENCES

EFFECTS OF THE MICROSTRUCTURE, AND DEGRADATION REACTION UNDER HEAT-TREATMENT ON MECHANICAL PROPERTIES OF SiC-POLYCRYSTALLINE FIBER

ABSTRACT

INTRODUCTION

EXPERIMENTAL

MATERIALS

TENSILE TEST

FRACTGRAPHY

RESULTS AND DISCUSSION TENSILE TEST AND WEIBULL ANALYSIS

CHARACTERIZATION OF THE FRACTURE SURFACE

CHARACTERIZATION OF THE FRACTURE ORIGIN

CALCULATION RESULTS AND HEAT-TREATMENT CONDITIONS

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

Innovative Design, Advanced Processing, and Manufacturing Technologies

FABRICATION AND MECHANICAL PROPERTIES OF ZrC-MODIFIED C/C-SiC COMPOSITES

ABSTRACT:

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSION

ACKNOWLEDGMENTS

REFERENCES

MANUFACTURE OF SiC/ZrSi

2

COMPOSITE MATERIALS: ASSESSING THERMAL COMPATIBILITY BETWEEN MATRIX AND REINFORCEMENT

ABSTRACT

INTRODUCTION

EXPERIMENTAL

CARBON/SILICON CARBIDE POROUS PREFORMS

Si-Zr ALLOYS

REACTIVE INFILTRATION

MICROSTRUCTURAL CHARACTERIZATION

COEFFICIENT OF THERMAL EXPANSION (CTE)

RESULTS AND DISCUSSION

ESTIMATION OF THE ALLOY REACTIVITY LIMIT

ALLOY CHARACTERIZATION

PREFORM CHARACTERIZATION

THERMAL COMPATIBILITY BETWEEN MATRIX AND REINFORCEMENT

SiC/Si-ZrSi

2

COMPOSITE MATERIALS

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

INFLUENCE OF THE ANNEALING PROCESS PARAMETERS IN THE PRODUCTION OF NEW SHORT-FIBRE-REINFORCED C/C-SIC COMPOSITES

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION OF THE CFRP COMPOSITES

RESULTS AND DISCUSSION OF THE C/C COMPOSITES

RESULTS AND DISCUSSION OF THE C/C-SIC COMPOSITES

CONCLUSIONS

REFERENCES

FIBER-MATRIX ADHESION IN CFRC GREENBODIES AND ITS INFLUENCE ON MICROCRACK FORMATION DURING THE CARBONIZATION PROCESS

ABSTRACT

INTRODUCTION

SAMPLE PREPARATION

EXPERIMENTAL METHODS

RESULTS

SUMMARY AND CONCLUSION

REFERENCES

EFFECTS OF SOURCE GAS FLOW PATHS ON THE MATRIX INFILTRATION BEHAVIORS AND MECHANICAL PROPERTIES OF CVI-PROCESSED SiC

f

/SiC COMPOSITE TUBES

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

FABRICATION OF CO-TOUGHENED C-SiC BASED COMPOSITE BY CARBON FIBERS AND SiC NANOFIBERS

ABSTRACT:

INTRODUCTION

EXPERIMENTAL PROCEDURES

RESULTS AND DISCUSSION

SUMMARY

ACKNOWLEDGMENTS

REFERENCES

INFLUENCING THE MECHANICAL PROPERTIES OF WEAK MATRIX C/C COMPOSITES BY MEANS OF MICROSTRUCTURAL DESIGN

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS

DISCUSSION

CONCLUSION

ACKNOWLEDGEMENT

REFERENCES

SPARK PLASMA SINTERING OF SILICON CARBIDE POWDERS WITH CARBON AND BORON AS ADDITIVES

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

REFERENCES

COMPARISON OF MACHINING TECHNOLOGIES FOR CMC MATERIALS USING ADVANCED 3D SURFACE ANALYSIS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

REFERENCES

INFILTRATION OF MOLTEN SILICON IN A POROUS BODY OF B

4

C UNDER MICROWAVE HEATING

ABSTRACT

INTRODUCTION

EXPERIMENTAL PROCEDURE

RESULT AND DISCUSSION

CONCLUSION

ACKNOWLEDGEMENTS

REFERENCES

REFRACTORY ADHESIVES FOR BONDING OF POLYMER DERIVED CERAMICS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

Advanced Thermal and Environmental Barrier Coatings

SELF-HEALING EBC MATERIAL FOR GAS TURBINE APPLICATIONS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSION

REFERENCES

MASS TRANSFER MECHANISM IN Yb

2

Si

2

O

7

UNDER OXYGEN POTENTIAL GRADIENTS AT HIGH TEMPERATURES

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

MAGNETRON SPUTTERED Y

2

SiO

5

ENVIRONMENTAL BARRIER COATINGS FOR SIC/SIC CMCS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSION

ACKNOWLEDGEMENTS

REFERENCES

Thermomechanical Behavior and Performance of Composites

THERMAL ABLATION PERFORMANCE OF C

F

-HFB

2

COMPOSITES WITH AND WITHOUT A C MATRIX DEPOSITED BY CVI

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSIONS

CONCLUSIONS

ACKNOWLEDGMENTS

REFERENCES

EXPERIMENTAL RESEARCH ON AIR PERMEABILITY OF FIBER REINFORCED AEROGEL

ABSTRACT

INTRODUCTION

EXPERIMENTAL PROCEDURES

ANALYSIS

PRESSURE PREDICTION

CONCLUSION

REFERENCES

FATIGUE BEHAVIOR OF AN ADVANCED SiC/SiC CERAMIC COMPOSITE AT 1300°C IN AIR AND IN STEAM

*

ABSTRACT

INTRODUCTION

MATERIAL AND EXPERIMENTAL ARRANGEMENTS

RESULTS AND DISCUSSION

CONCLUDING REMARKS

ACKNOWLEDGEMENTS

REFERENCES

STRENGTH RECOVERY AND CRACK-FILLING BEHAVIOR OF ALUMINA/ TiC SELF-HEALING CERAMICS

ABSTRACT

INTRODUCTION

THEORETICAL CALCULATION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

HOT GAS STABILITY OF VARIOUS CERAMIC MATRIX COMPOSITES

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

REFERENCES

DAMAGE ANALYSIS IN 3D WOVEN SiC/SiC CERAMIC MATRIX COMPOSITE

ABSTRACT

INTRODUCTION

EXPERIMENTAL TECHNIQUES AND TESTING PROCEDURE

RESULTS

DISCUSSION

CONCLUSIONS

REFERENCES

THE WEDGE-LOADED DOUBLE CANTILEVER BEAM TEST: A FRICTION BASED METHOD FOR MEASURING INTERLAMINAR FRACUTRE PROPERTIES IN CERAMIC MATRIX COMPOSITES

ABSTRACT

INTRODUCTION

EXPERIMENTAL PROCEDURE

ANALYTICAL ANALYSIS

RESULTS AND DISCUSSION

CONCLUSION

ACKNOWLEDGEMENTS

REFERENCES

DAMAGE MONITORING OF MI CMCS WITH STRESS CONCENTRATIONS UTILIZING ACOUSTIC EMISSION AND ELECTRICAL RESISTANCE

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

REFERENCES

DAMAGE EVOLUTION AND FRACTURE IN SIC

F

/SIC CERAMIC MATRIX COMPOSITE SPECIMENS

ABSTRACT

INTRODUCTION

EXPERIMENTAL METHODS

RESULTS

DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

DAMAGE CHARACTERIZATION OF HIGH VELOCITY IMPACT IN CURVED SIC/SIC COMPOSITES

ABSTRACT

INTRODUCTION

EXPERIMENTAL PROCEDURE

RESULTS AND DISCUSSION

CONCLUSION

ACKNOWLEDGEMENTS

REFERENCES

EFFECT OF VACUUM ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SILICON CARBIDE PRODUCED BY REACTIVE INFILTRATION

ABSTRACT

STUDENT POSTER AWARD

INTRODUCTION

EXPERIMENTAL

MATERIALS

REACTIVE INFILTRATION

MECHANICAL CHARACTERIZATION

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

HIGH-TEMPERATURE MECHANICAL PROPERTIES OF SILICA AEROGEL COMPOSITES REINFORCED BY MULLITE FIBERS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

OXIDATION RESISTANCE MECHANISM OF TiAlSiCN AND TiCrSiCN COMPOSITIONS MADE BY PLASMA SPARK SINTERING AT 1200°C

ABSTRACT:

INTRODUCTION:

EXPERIMENTAL

RESULTS AND DISCUSSION

TiAlSiCN COMPOSITION:

TiCrSiCN COMPOSITION:

CONCLUSION:

REFERENCES

EFFECTS OF BINDERS (Ni-Co) AND TERNARY CARBIDE (TaC) ON FRICTION AND WEAR BEHAVIOR OF Ti(CN) BASED CERMETS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSION

REFERENCES

Component Testing and Applications of Composites

APPLICATION OF CMC MATERIALS IN ROCKET PROPULSION

ABSTRACT

INTRODUCTION

PROCESS OVERVIEW

COMPONENT PRODUCTION

TESTING

PRODUCTION AND APPLICATION

FUTURE DEVELOPMENT

REFERENCES

DEVELOPMENT OF CARBON FIBER REINFORCED CMC FOR AUTOMOTIVE APPLICATIONS

ABSTRACT

INTRODUCTION

MANUFACTURING PROCESSES

PROPERTIES

CMC COMPOSITES FOR AUTOMOTIVE BRAKE DISCS

CONCLUSIONS

REFERENCES

OCTRA - OPTIMIZED CERAMIC FOR HYPERSONIC APPLICATION WITH TRANSPIRATION COOLING

ABSTRACT

INTRODUCTION

STATE OF THE ART CMC MATERIALS

MANUFACTURING OF OCTRA

MATERIAL CHARACTERIZATION

CHANNEL VARIATION

APPLICATIONS

CONCLUSION

ACKNOWLEDGEMENT

REFERENCES

OXIDE-OXIDE CERAMIC MATRIX COMPOSITES - ENABLING WIDESPREAD INDUSTRY ADOPTION

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSION

ACKNOWLEDGEMENTS

REFERENCES

UPDATING COMPOSITE MATERIALS HANDBOOK-17 VOLUME 5—CERAMIC MATRIX COMPOSITES

ABSTRACT

INTRODUCTION

COMPOSITE MATERIALS HANDBOOK-17 (CMH-17)

CERTIFYING COMPOSITE MATERIALS

UPDATING

CMH-17 VOLUME 5

CONTENT

ACKNOWLEDGEMENT OF

CMH-17 VOLUME 5

CONTRIBUTORS

SUMMARY

REFERENCES

Multifunctional Coatings for Sustainable Energy and Environmental Applications

DEVELOPMENT OF SUPERFINE NANO-COMPOSITES ANTIFOULING COATINGS FOR SHIP HULLS

ABSTRACT

INTRODUCTION

EXPERIMENTAL WORK

SEM.

FOUL RELEASE TESTING

CONCLUSION

REFERENCES

EFFECT OF HEAT EXPOSURE ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF 3Al

2

O

3

·2SiO

2

/Si/SiC COATING SYSTEM

ABSTRACT

1. INTRODUCTION

2. EXPERIMENTAL PROCEDURE

3. RESULTS and DISCUSSION

4. CONCLUSION

SUSPENSION PLASMA SPRAY OF YTTRIA STABILIZED ZIRCONIA COATINGS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

THICK ALUMINUM NITRIDE COATINGS BY REACTIVE DC PLASMA

ABSTRACT

INTRODUCTION

EXPERIMENTAL PROCEDURE

RESULTS AND DISCUSSION

CONCLUSIONS

REFERENCES

USING AN AXIAL FEEDING DC-PLASMA SPRAY GUN FOR FABRICATION OF CERAMIC COATINGS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

REFERENCES

Ceramics for Sustainable Infrastructure

CHARACTERIZATION OF TWO CALCIUM ALUMINATE CEMENT PASTES

ABSTRACT

INTRODUCTION

EXPERIMENTAL PHASE

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGEMENTS

REFERENCES

ADDITIVE MANUFACTURING OF KAOLINITE CLAY FROM COLOMBIA

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS

ANALYSIS

CONCLUSIONS.

REFERENCES

Advanced Materials, Technologies, and Devices for Electro-Optical and Medical Applications

ELASTIC CONSTANTS EVALUATED BY SOUND VELOCITIES IN RELAXOR SINGLE-CRYSTAL PLATES APPLYING TO ULTRASONIC PROBE FOR MEDICAL USES

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGMENTS

REFERENCES

HIGH PIEZOELECTRICITY IN CERAMICS EVALUATED BY ELASTIC CONSTANTS

ABSTRACT

INTRODUCTION

EXPERIMENTAL

RESULTS AND DISCUSSION

CONCLUSIONS

ACKNOWLEDGMENTS

REFERENCES

A THERMO-ELECTRO-MECHANICAL VIBRATION ANALYSIS OF SIZE-DEPENDENT FUNCTIONALLY GRADED PIEZOELECTRIC NANOBEAMS

ABSTRACT

INTRODUCTION

THEORETICAL FORMULATIONS

SOLUTION PROCEDURE

RESULTS AND DISCUSSION

CONCLUSIONS

REFERENCES

DEVELOPMENT OF LIQUID CRYSTAL DISPLAY WITH RGB LASER BACKLIGHT

ABSTRACT

1. INTRODUCTION

2. WIDENING OF COLOR GAMUT

3. DEVELOPMENT OF LCD WITH RGB LASER BACKLIGHT

4. OPTICAL CHARACTERISTICS OF DEVELOPED LCD

5. CONCLUSIONS

REFERENCES

DEVELOPMENT OF HIGH THERMAL CONDUCTIVITY SILICON NITRIDE SUBSTRATES

ABSTRACT

1. INTRODUCTION

2. THERMAL CONDUCTIVITY OF SILICON NITRIDE

3. EFFECT OF METALLIC IMPURITIES ON THERMAL CONDUCTIVITY OF SRBSN

4. DEVELOPMENT OF THE SRBSN PROCESS

5. SUMMARY

6. REFERENCES

EULA