Fundamental Elements of Applied Superconductivity in Electrical Engineering E-Book

Yinshun Wang

• Herausgeber: John Wiley & Sons
• Kategorie: Wissenschaft und neue Technologien
• Sprache: Englisch

Seitenzahl: 757

Veröffentlichungsjahr: 2013

Beschreibung

Superconducting technology is potentially important as one of the future smart grid technologies. It is a combination of superconductor materials, electrical engineering, cryogenic insulation, cryogenics and cryostats. There has been no specific book fully describing this branch of science and technology in electrical engineering. However, this book includes these areas, and is essential for those majoring in applied superconductivity in electrical engineering. Recently, superconducting technology has made great progress. Many universities and companies are involved in applied superconductivity with the support of government. Over the next five years, departments of electrical engineering in universities and companies will become more involved in this area. This book: * will enable people to directly carry out research on applied superconductivity in electrical engineering * is more comprehensive and practical when compared to other advances * presents a clear introduction to the application of superconductor in electrical engineering and related fundamental technologies * arms readers with the technological aspects of superconductivity required to produce a machine * covers power supplying technologies in superconducting electric apparatus * is well organized and adaptable for students, lecturers, researchers and engineers * lecture slides suitable for lecturers available on the Wiley Companion Website Fundamental Elements of Applied Superconductivity in Electrical Engineering is ideal for academic researchers, graduates and undergraduate students in electrical engineering. It is also an excellent reference work for superconducting device researchers and engineers.

Leseprobe

Contents

Cover

Title Page

Copyright Page

Preface

Acknowledgments

Abbreviations and Symbols

Chapter 1 Introduction

References

Chapter 2 Superconductivity

2.1 The Basic Properties of Superconductors

2.2 Critical Parameters

2.3 Classification and Magnetization

2.4 Measurement Technologies of Critical Parameters

References

Chapter 3 Mechanical Properties and Anisotropy of Superconducting Materials

3.1 Mechanical Properties

3.2 Electromagnetic Anisotropy

3.3 Critical Current Characteristics of LTS Materials

3.4 Irreversible Fields of Superconducting Materials

3.5 Critical Temperature of Several Kinds of HTS Materials

3.6 Thermodynamic Properties of Practical Superconducting Materials

References

Chapter 4 Stability of Superconductors

4.1 Critical States

4.2 Adiabatic Stabilization

4.3 Adiabatic Stability with Flux Jump

4.4 Self-Field Stability

4.5 Dynamic Stability

4.6 Cryostability

4.7 NPZ Velocity in Adiabatic Composite Superconductors

4.8 Stability of HTS Bulks

4.9 Mechanical Stability of Superconducting Magnets

4.10 Degradation and Training Effect of Superconducting Magnets

4.11 Quench and Protection of Superconducting Magnets

4.12 Tests of Stability

References

Chapter 5 AC Losses

5.1 AC Losses of Slab

5.2 AC Losses of Concentric Cylinder

5.3 AC Losses of Hybrid Concentric Cylinder

5.4 AC Losses of Concentric Hollow Cylinder in Longitudinal Field

5.5 AC Losses for Large Transverse Rotating Field

5.6 AC Losses with Different Phases between AC Field and AC Current

5.7 AC Losses for other Waves of AC Excitation Fields

5.8 AC Losses for other Critical State Models

5.9 Other AC Losses

5.10 Measurements of AC Loss

5.11 AC Losses Introduction of Superconducting Electrical Apparatus

References

Chapter 6 Brief Introduction to Fabricating Technologies of Practical Superconducting Materials

6.1 NbTi Wire

6.2 Nb3Sn Wire

6.3 Nb3Al Wire

6.4 MgB2 Wire

6.5 BSCCO Tape/Wire

6.6 YBCO Tape

6.7 HTS Bulk

References

Chapter 7 Principles and Methods for Contact-Free Measurements of HTS Critical Current and n Values

7.1 Measurement Introduction of Critical Current and n Values

7.2 Critical Current Measurements of HTS Tape by Contact-Free Methods

7.3 n Value Measurements of HTS Tape by Contact-Free Methods

7.4 Analysis on Uniformity of Critical Current and n Values in Practical Long HTS Tape

7.5 Next Measurements of Critical Currents and n Values by Contact-Free Methods

References

Chapter 8 Cryogenic Insulating Materials and Performances

8.1 Insulating Properties of Cryogenic Gas

8.2 Insulating Characteristics of Cryogenic Liquid

8.3 Insulating Properties of Organic Insulating Films

8.4 Cryogenic Insulating Paints and Cryogenic Adhesive

8.5 Structural Materials for Cryogenic Insulation

8.6 Inorganic Insulating Materials

References

Chapter 9 Refrigeration and Cryostats

9.1 Cryogens

9.2 Cryostat

9.3 Refrigeration

9.4 Cooling Technologies of Superconducting Electric Apparatus

References

Chapter 10 Power Supplying Technology in Superconducting Electrical Apparatus

10.1 Current Leads

10.2 Superconducting Switch

10.3 Flux Pump

References

Chapter 11 Basic Structure and Principle of Superconducting Apparatus in Power System

11.1 Cable

11.2 Fault Current Limiter

11.3 Transformer

11.4 Rotating Machine-Generator/Motor

11.5 Superconducting Magnetic Energy Storage (SMES)

11.6 Superconducting Flywheel Energy Storage (SFES)

11.7 Other Industrial Applications

References

Chapter 12 Case Study of Superconductivity Applications in Power System-HTS Cable

12.1 Design of AC/CD HTS Cable Conductor

12.2 Electromagnetic Design of AC/CD Cable Conductor

12.3 Analysis on AC Losses of DC HTS Cable

12.4 Design of AC WD HTS Cable Conductor

12.5 Design of DC HTS Cable Conductor

12.6 Design of Cryostat

12.7 Manufacture of CD HTS Cable Conductor

12.8 Bending of HTS Cable

12.9 Termination and Joint

12.10 Circulating Cooling System and Monitoring System

References

Appendix

A.1 Calculations of Volumetric Heat Capacity, Thermal Conductivity and Resistivity of Composite Conductor

A.2 Eddy Current Loss of Practical HTS Coated Conductor (YBCO CC)

A.3 Calculation of Geometrical Factor G

A.4 Derivation of Self and Mutual Inductances of CD Cable

A.5 Other Models for Hysteresis Loss Calculations of HTS Cable

A.6 Cooling Arrangements

References

Index

This edition first published 2013 © 2013 Science Press. All rights reserved.

Published by John Wiley & Sons Singapore Pte. Ltd., 1 Fusionopolis Walk, #07-01 Solaris South Tower, Singapore 138628, under exclusive license by Science Press in all media and all languages throughout the world excluding Mainland China and excluding Simplified and Traditional Chinese languages.

For details of our global editorial offices, for customer services and for information about how to apply for permission to reuse the copyright material in this book please see our website at www.wiley.com.

All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, scanning, or otherwise, except as expressly permitted by law, without either the prior written permission of the Publisher, or authorization through payment of the appropriate photocopy fee to the Copyright Clearance Center. Requests for permission should be addressed to the Publisher, John Wiley & Sons Singapore Pte. Ltd., 1 Fusionopolis Walk, #07-01 Solaris South Tower, Singapore 138628, tel: [phone], fax: [phone], email: [e-mail].

Wiley also publishes its books in a variety of electronic formats. Some content that appears in print may not be available in electronic books.

Designations used by companies to distinguish their products are often claimed as trademarks. All brand names and product names used in this book are trade names, service marks, trademarks or registered trademarks of their respective owners. The Publisher is not associated with any product or vendor mentioned in this book. This publication is designed to provide accurate and authoritative information in regard to the subject matter covered. It is sold on the understanding that the Publisher is not engaged in rendering professional services. If professional advice or other expert assistance is required, the services of a competent professional should be sought.

Library of Congress Cataloging-in-Publication Data

Wang, Yinshun.  Fundamental elements of applied superconductivity in electrical engineering / Yinshun Wang.   pages cm  Includes bibliographical references and index.  ISBN 978-1-118-45114-4 (cloth)  1. Superconductors. 2. Electric power. 3. Superconductivity. 4. Electrical engineering. I. Title.  TK454.4.S93W26 2013  621.3′5–dc23 2012049085

A catalogue record for this book is available from the British Library.

ISBN: 9781118451144

Preface

Since its discovery, superconductivity and its applications have become one of the most active frontiers in modern science and technology. With the progress in exploration and research of superconductivity over nearly half a century, the practical NbTi and Nb3Sn superconducting wires were successfully fabricated in the 1960s. Superconducting technology, especially superconducting magnet technology, was then put into applications. However, it is difficult for superconductors to be extensively used since they must work at a liquid helium temperature of 4.2 K.

Although the alternating current (AC) losses of superconducting windings is much lower than those of conventional copper windings, the effect of 1 W power consumption generated at a liquid helium temperature is at least equivalent to 500 W consumption of cooling power at room temperature. Therefore, the AC loss is not fully compensated for by reduction in AC losses, and the operating cost of superconducting electrical equipment is expensive, except in direct current (DC) applications. Until the 1980s, the AC application of the Low Temperature Superconductors (LTS) in a power system had not made substantial progress.

Since the High Temperature Superconductor (HTS) was discovered in 1986, the application of HTS electrical equipment operating at the liquid nitrogen temperature of 77 K came into being, and superconducting power technology was hoped to be applied in electrical power systems.

Great progress was made in development of HTS materials in the late 1990s, and practical HTS tapes were commercially realized. Research on superconducting power technology has made important and significant progress in many countries. At present, many superconducting equipment prototypes, such as superconducting cable, superconducting transformer, superconducting Fault Current Limiter (FCL), superconducting motor/generator, superconducting magnetic energy storage and other superconducting equipment, have been developed and demonstrated. At present, several groups of HTS cable prototypes operate in live grids. Superconducting technology has also found important applications in information technology, traffic transportation, scientific instrument, medical technology, national defence, large scientific projects and other fields besides the energy field.

Superconducting power technology is highly comprehensive and interdisciplinary, and related to superconducting technology, electric power technology, cryogenic insulation, cryogenic refrigeration, materials science and technology, etc. At the present, it is a promising research field of new science and high technology, with important scientific significance and application prospects in power systems. At the same time, superconducting power technology will be one of the key technologies in the future Smart Grid. It is predicted that this technology will become a practical technology of extensive scale and play an important role in energy saving, emission reduction, low carbon economy, renewable energy resources, and in other fields.

This book briefly introduces the basic theory of superconductivity. According to the knowledge structure and the order required in application of superconducting technology, electromagnetic properties of practical superconducting materials, stability, AC losses, processing technology, measurement of critical current and n values by contact-free methods, cryogenic insulation, cryostat and refrigeration, current leads and flux pump, are presented respectively. The principles and structures of various superconducting equipment are also described. Finally, high-Tc superconducting (HTS) cables, and superconductivity applications in power systems, are systematically described to show how the basic technologies described elsewhere in the book fit together. The content of the book focuses on the fundamental elements of applied superconductivity in electrical engineering. A feature of this book is that experimental technology is added to related chapters together with the introduction of fundamental theoretical and technological principles.

There are 12 chapters in the book. The first chapter briefly introduces applications of superconducting power technology with several superconducting apparatus used in power systems. Chapter 2 presents the basic theories and critical parameters of superconductors. Chapter 3 describes mechanical and electromagnetic properties of superconducting materials. Chapter 4 introduces the stability and quench characteristics of superconducting materials and magnets, and protection technology of superconducting magnets. Chapter 5 systematically describes various AC losses of superconducting in commercial frequency power, which includes hysteresis loss, magnetic flux flow loss, coupling and eddy current losses, and methods of measuring AC loss. Chapter 6 briefly lists the preparation techniques of practical superconducting materials. Chapter 7 presents theory and measurements of critical current and n values in practical HTS tapes by contact-free methods, and their evaluation and calculation of non-uniformity are also included. Chapter 8 concerns the insulation characteristics of some cryogenic gas, cryogenic liquid, organic insulation film materials, inorganic insulating materials and cryogenic adhesive. Chapter 9 mainly shows the heat-conduction theory, cryogenic device design and cryogenic refrigeration technology. Chapter 10 systematically introduces the design principles and methods of various current leads, including conductor-cooled current leads, gas-cooled lead, Peltier current lead (PCL) and the hybrid current lead, the applications of superconducting persistent current switch (PCS) and superconducting flux pump technology. Chapter 11 presents basic structures of several superconducting apparatus in power systems. As in the case of the application of superconductivity in a power system, Chapter 12 systematically describes the design of HTS cable.

Acknowledgments

The author would like to thank Science Press for kindly granting permissions for all the figures and tables obtained from the Chinese title: Bases of applied superconductivity in Electrical Engineering, ISBN: 9787030315632, by Yinshun Wang, published by Science Press in June 2011.

When writing this book, the author referenced many worldwide research articles and books, so he would like to express his cordial thanks and respect to these copyright owners. The author is also indebted to undergraduates and graduates for suggesting a book based on their several years of course work. Thanks also go to Prof. Shen Guoliu for his detailed proofreading of the book and for providing valuable suggestions. Specifically, the author thanks his wife Ms. Yang Haiyan, who did almost all the housework by herself in order to support his writing.

Because of my limited knowledge, it is very hard to avoid some omissions and even mistakes, so it is my pleasure to receive your criticisms and corrections.

Yinshun Wang State Key Laboratory for Alternate Electrical Power System with Renewable Energy Sources Key Laboratory of HV and EMC Beijing North China Electric Power University

Beijing, ChinaOctober 2012

1

Introduction

In 1911, the physicist H.K. Onnes, of Leiden Laboratory in the Netherlands, was measuring the resistivity of metals at low temperatures. He discovered that the resistance of mercury completely disappeared when the temperature dropped to that of liquid helium (4.2 K). This phenomenon became known as superconductivity. In 1933, German scientists W. Meissner and R. Ochsenfeld found that the magnetic flux completely disappeared from the interior of materials with zero resistance when cooled to 4.2 K in the magnetic field. This zero magnetic field inside a material became known as perfect diamagnetism and is now called the Meissner effect.

In 1962, B.D. Josephson theoretically predicted the superconducting quantum tunneling effect, known as the Josephson effect. This is where a current flows for an indefinitely long time, without any voltage applied, across a device known as a Josephson junction (JJ) consisting of two superconductors coupled by a weak link. The weak link can consist of a thin insulating barrier (known as a superconductor-insulator-superconductor, or S-I-S) junction, and a short section of non-superconducting (S-N-S) metal. Subsequently, P.W. Anderson and J.M. Rowell experimentally confirmed Josephson's prediction.