Progress in Adhesion and Adhesives, Volume 9 E-Book

• Herausgeber: John Wiley & Sons
• Kategorie: Fachliteratur
• Sprache: Englisch

Seitenzahl: 896

Veröffentlichungsjahr: 2025

Beschreibung

Keep up-to-date with the latest on adhesion and adhesives from an expert group worldwide

The present book constitutes Volume 9 in the book series Progress in Adhesion and Adhesives which was conceived as an annual publication and the premier volume made its debut in 2015. These volumes provide state-of-the-knowledge and curated reviews on many and varied topics about adhesion and adhesives.

The current book contains 14 chapters that include the Usage of Hydrophobic and Icephobic Coatings for Aircraft Icing Mitigation; Hydrophobic Coatings: An Insight into Fundamental Concepts and Modern Applications; Enhancement of Adhesion of Polymers by Plasma Treatment; Hydrophobicity Modification of Artificial Leather by Atmospheric Pressure Plasma Treatment; Sustainable Plasma Technology as Surface Treatment on Footwear Materials: Bromination - The Only Selective Plasma Process; Structural Bonding to Low Surface Energy (LSE) Materials; Review on the Effects of a Defect and/or Joint Geometry on Stress Distribution in Tubular Joints Under Tensile Loads; Failure Cases in Adhesive Joints and Coatings; Initiating Systems for Curing Anaerobic Adhesives; Progress in Using Fungal Mycelia as Adhesive in Composites; Mechanically Responsive Hydrogels as Adhesives for Clinical Applications; Polyurea Adhesives and Coatings; Adhesion Strength of Electrode Coatings in Lithium-Ion Batteries and Supercapacitors.

Audience

This book will be valuable to adhesionists, adhesive technologists, polymer scientists, and materials scientists in adhesive bonding, plasma polymerization, adhesion in polymer composites, ice adhesion and mitigation, and adhesive joint testing.

Leseprobe

Scrivener Publishing100 Cummings Center, Suite 541J Beverly, MA 01915-6106

Adhesion and Adhesives: Fundamentals and Applied Aspects

Series Editor: Dr. K.L. Mittal ([email protected])

The topics to be covered include, but not limited to, basic and theoretical aspects of adhesion; modeling of adhesion phenomena; mechanisms of adhesion; surface and interfacial analysis and characterization; unraveling of events at interfaces; characterization of interphases; adhesion of thin films and coatings; adhesion aspects in reinforced composites; formation, characterization and durability of adhesive joints; surface preparation methods; polymer surface modification; biological adhesion; particle adhesion; adhesion of metallized plastics; adhesion of diamond-like films; adhesion promoters; contact angle, wettability and adhesion; superhydrophobicity and superhydrophilicity. With regards to adhesives, the Series will include, but not limited, to green adhesives; novel and high-performance adhesives; and medical adhesive applications.

Publishers at Scrivener

Martin Scrivener ([email protected]) Phillip Carmical ([email protected])

Progress in Adhesion and Adhesives

Volume 9

Edited by

K.L. Mittal

This edition first published 2025 by John Wiley & Sons, Inc., 111 River Street, Hoboken, NJ 07030, USA and Scrivener Publishing LLC, 100 Cummings Center, Suite 541J, Beverly, MA 01915, USA© 2025 Scrivener Publishing LLCFor more information about Scrivener publications please visit www.scrivenerpublishing.com.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as permitted by law. Advice on how to obtain permission to reuse material from this title is available at http://www.wiley.com/go/permissions.

Wiley Global Headquarters111 River Street, Hoboken, NJ 07030, USA

For details of our global editorial offices, customer services, and more information about Wiley products visit us at www.wiley.com.

Limit of Liability/Disclaimer of WarrantyWhile the publisher and authors have used their best efforts in preparing this work, they make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation any implied warranties of merchantability or fitness for a particular purpose. No warranty may be created or extended by sales representatives, written sales materials, or promotional statements for this work. The fact that an organization, website, or product is referred to in this work as a citation and/or potential source of further information does not mean that the publisher and authors endorse the information or services the organization, website, or product may provide or recommendations it may make. This work is sold with the understanding that the publisher is not engaged in rendering professional services. The advice and strategies contained herein may not be suitable for your situation. You should consult with a specialist where appropriate. Neither the publisher nor authors shall be liable for any loss of profit or any other commercial damages, including but not limited to special, incidental, consequential, or other damages. Further, readers should be aware that websites listed in this work may have changed or disappeared between when this work was written and when it is read.

Library of Congress Cataloging-in-Publication Data

ISBN 978-1-394-31505-5

Cover image: Provided by the EditorCover design by Russell Richardson

Preface

The present book constitutes Volume 9 in the book series “Progress in Adhesion and Adhesives”. This book series was conceived in 2014 and the premier volume made its debut in 2015. Apropos, we did not label the premier volume as Volume 1 as at that time we did not have the sixth sense to tell how this series was going to evolve. It should be recorded for posterity that Volumes 1-6 were based on review articles first published in the journal “Reviews of Adhesion and Adhesives” (RAA). As of July 2022, I have not been associated with RAA. As a result, Volumes 7, 8 and 9 contain invited chapters specifically commissioned for these volumes.

If comments from readers and colleagues are a barometer for the success of the series, then these 8 Volumes have served their intended purpose, i.e. to provide state-of-the-knowledge reviews on many and varied topics within the broad purview of adhesion and adhesives. These 8 volumes have been enthusiastically received by the community of adhesionists and this has fully vindicated the publication of this book series. So, we have decided to keep this book series going and bring out new volumes on a regular (yearly) basis.

The current book (Volume 9) contains 14 chapters that have not been previously published. The topics covered include: Use of hydrophobic and icephobic coatings for aircraft icing mitigation; fundamental concepts and application of hydrophobic coatings; plasma treatment of polymers to enhance their adhesion; atmospheric pressure plasma treatment of artificial leather; sustainable plasma technology as surface treatment on footwear materials; bromination--the only selective plasma process; bonding to low surface energy materials and ways to improve bond strength; effects of a defect and/or joint geometry on stress distribution in tubular joints under tensile loads; failure cases in adhesive joints and coatings; initiating systems for curing anaerobic adhesives; use of fungal mycelia as adhesive in composites; mechanically responsive hydrogels as adhesives for clinical applications; polyurea adhesives and coatings; and adhesion of electrode coatings in lithium-ion batteries and supercapacitors.

The chapters in this book are written by world-renowned researchers actively involved in the arena of adhesion and adhesives. This book is profusely illustrated and copiously referenced. This book, like its predecessors, should be of appeal and interest to adhesionists, adhesive technologists, polymer scientists, materials scientists, and those involved/interested in adhesive bonding, plasma treatment of polymers including artificial leather, anaerobic adhesives, hydrogels as adhesives, and adhesion in lithium-ion batteries and supercapacitors.

Now it is my pleasant task to thank all those who were instrumental in materializing this book. Naturally first and foremost, my thanks go to the authors for their keen interest, sustained enthusiasm, unwavering cooperation, and sharing their valuable research experience in the form of written accounts (which essentially provided the requisite material for this book, without which this book could not have been possible). Also, Martin Scrivener (Publisher) should be thanked for conceiving the idea of publishing this book series and for his steadfast interest and whole-hearted support.

K.L. Mittal

Edison, New Jersey, USAE-mail- [email protected] 2025